Foundation Repair Before & After Photos

Derek has a crawlspace in Ridgeway, ON. The floor is soft in places and un-level as well. Omni Basement Systems installed the galvanized Smartjacks and a supplemental beam to support the floor. The current supports were merely blocks that had been shimmed a multiple of times. 

DonnaM in Welland has a house with a crawlspace. Donna noticed that the floors were getting out of level and had concerns for the safety of her home. The piers in the house were sinking and were not adjustable. 
Keith recommended add SmartJacks by Supportworks. Three Smartjacks were placed under the main beam of the house. The SmartJacks are fully galvanized and cannot rust. They are also fully adjustable in the case that further adjustments are required. 
Omni also removed debris and insulation to prepare for sprayfoam that is coming the following week. 

Agnes has a home in Welland,On with a nasty crawlspace. The floor support in the home is very poor. The supports were made up of pieces of wood stacked on top of each other.  Omni basement Systems replaced the supports with the Smartjacks. The Smartjacks are strong, galvanized steel support jacks that sit on a very large base plate. They are also fully adjustable. 

Sharon has a house with a block foundation that is showing signs of bowing in Milton, ON. Phil from Omni Basement Systems recommended using CarbonArmor for wall stabilization. CarbonArmor is 7" wide strips of Carbon Fiber that is epoxied to the wall. Then the lower blocks on either side is filled with grout to solidify the wall 

Kari R Moved into their new house 11 years ago and started noticing cracks in the foundation and brick work. since the house was new they contacted the builder and they had a basement wall crack fixed by another company through Tarion warantee. The cracks on the exterior got more noticeable and a crack on the concrete slab floor was present. The customer contacted a contractor before calling Omni Basement systems but they could not help. 

The customer then called Omni Basement Systems and one of our highly trained estimators came to see her. After a thorough inspection of the house and foundation and hiring an Engineer to assisit with design of a sytem, Omni was ready to go ahead with resolving her issues. 

What Omni Basement Systems determined was that one side of the house had settled and had dropped.

The solution was to install Foundation Supportworks inc Push Pier supplementary support systems to support the footing from settling any further. Once this was installed on the customers foundation wall, Omni Basement systems was able to apply force to not only support the foundation but lift it back into original position. 

The customer is very pleased with the result and the workmanship on the job and with communication with our staff members.