Omni Basement Systems Before & After Photos

Tristen in Hamilton, On had a crawlspace with lots of moisture issues. The joists were sagging and there was mold growing on them. 
This was caused by a bare dirt crawlspace floor that was constantly releasing moisture into the air envelope of the crawlspace. Old way of thinking was to to simply vent the crawlspace to "air it out". After years and tears of studies, this was found to be untrue. The best way to prevent the moisture is to seal the ground from the air envelope. Make this space a part of the home.  Now the air can be dehumidified and storage space can be gained. Because of the damage that was already done to the floor joists above, a Supplemental Beam and SmartJacks from Supportworks were installed. Voila, the crawlspace has been transformed. 

Dani B. has a century old home in Hamilton, On that needed to waterproofed. there were lots of challenges in waterproofing this home. Before Omni Basement Systems could start to do any work, The customer had to have asbestos removed nad upgrade the electrical panel. Once this was done Omni went to work with the waterproofing. The floor was opened up and a drainage system was installed with a wall membrane. The customers are very happy with the result. 

Christopher P. was having water issues in his Hamilton, On home so he hired Omni Basement Systems to install an interior drain system. Along with the drain, Omni installed the incredible SuperSump sump pump system. This system includes the amazing Zoeller M53 cast iron pump. 

Matthew has a home with a nasty crawlspace in Hamilton, On. Keith from Omni Basement Systems met with Matthew and recommended the Cleanspace vapor barrier system to isolate the earth moisture from the home. 
The Cleanspace barrier is a 20mil thick, 7 layer lining. 

 Ian has a house in Hamilton, On that needed an interior waterproofing job. Omni Basement Systems recommended an interior drainage system with the a sump system. For the walls, Omni installed Delta brand wall membrane.