Omni Basement Systems Before & After Photos

Click on a photo to enlarge.

Sealed waqll crack in Brantfor, On

Greg had a wall crack in the corner of his basement. Omni Basement Systems sealed the wall crack with the Flexispan wall crack repair. Just like the name suggests, the flexispan will stay flexible for the life of the home. 

Interior Waterproofing in Brantford, On

Jim F. in Brantford, On needed some waterproofing in his home that has a block foundation. Omni Basement Systems installed their patented drain system called WaterGuard and connected it to Jim's existing sump system. As a wall membrane, Omni installed Cleanspace. This is a 14mil thick liner that is mechanically attached to the wall. This wall membrane will allow moisture from the wall, to drain down to the waterguard drainage system. 

Waterproofing a poured concrete basement in Brantford, On

Bob and Sharon have a poured concrete basement in Brantford, On that need to be waterproofed. there was leaking from the footing wall joint that was making the walls wet and moldy. It was time to fix this problem. First step was to tear-out the finished walls. There was considerable amount of water under the slab so Omni decided to add the sump system as soon as possible. The Sump installed was the incredible Triplesafe system. The Triplesafe features three sumps in one liner. Two of the pumps are A.C. powered, cast-iron, Zoeller pumps. The third pump is a D.C. powered, battery back-up pump that has it's own power cell and charger. 

Later, Omni went back and did the waterproofing. The patented drain system, WaterGuard was installed along with the Cleanspace wall membrane. 

Crawlspace Waterproofing and insulation in Caledonia, ON

Joan had a crawlpace in her split level home in Caledonia and needed to waterproof plus insulate. 

Omni installed their patented drain drain system with a Sump system and foam insulation to the walls. 

Foundation wall support in Brantford, On

 Greg has a home with a poured foundation wall that has some serious cracking. The concern is that it may be structural related. 

Omni Basement Systems used our very own Carbon Armor system from Supportworks to strengthen the wall so it will not tip in or bow. 

The Carbon Armor are 7" wide Carbon fiber strips that are epoxied to the wall. Also there are carbon armor straps that lock the wall to the floor joist system via the rim joist. 

our service area

We serve the following areas

Our Locations:

Omni Basement Systems
95 Frid Street Unit 1
Hamilton, ON L8P 4M3
1-289-769-8994
Service Area
Free Estimate